Ratio: | 5 : 1 |
Input RPM: | 1750 |
Output RPM: | 342 |
Input HP: | 2.33 |
Output HP: | 2.26 |
Output Torque (lb.-in.): | 428 |
Housing Construction: | Die Cast Aluminum |
Overhung Load (lbs.): | 300 |
Weight: | 19 LBS |
Motor C-Flange: | 56C |
Output C-Flange: | 56C |
Replacement Oil: | Mobelgear SHC320 Synthetic Oil |
Oil Capacity (TX Series): | 12 oz. |
Gear Reducer, 5:1 56C Face Inline
Used on 4 Station Cappers for the Spindle Motor
*
Do Not mix Lubricants in the reducer. If oil is needed, drain the gear box and replace all of the oil.
Always check for proper oil level after filling. Capacities vary somewhat with model and mounting position.
Oil should rise to bottom edge of level hole. Do not overfill.