Loading... Please wait...

PLC’s, HMI’s, & Controllers

  • Pages:
  • 1
  • 2
  • 1204-183b

    5.7"COLOR(TFT) TOUCHSCREEN" @ 24DC

    Maple Color Touch Screen5.6" Replacement for both Nematron,& Maple Screens, 1204-144 & 1204-167: Requires use of 5000 solfware, and new comm. cable 1201-037Not ease convert between old and new systems......

    View Product Details
  • Clutch/Brake Drive Board

    Clutch/Brake Drive Board

    Used on clutch/brake labeler. Power unit supplied control power alternating from brake to clutch. Warner

    View Product Details
  • CONTROLLER, 1AMP OUTPUT MOD (DCS)

    CONTROLLER, 1AMP OUTPUT MOD (DCS)

    CONTROLLER, 1AMP OUTPUT MODUAL, FOR A DCS CONTROLLER

    View Product Details
  • 1204-188

    CONTROLLER, DCR____REPLACEMENT OF DCS

    This is a Replacement Controller for the DCS Controller, Known information: 16 heads, powered at 115Vac, Most options of standard DCS Controller, But only 2 Aux outputs... Has Float Controls, 5" Color Touch Screen, with...

    View Product Details
  • 1204-004
 - 37 Button Keypad

    CONTROLLER, KEYPAD (DCS)_DISCONTINUED

    CONTROLLER, KEYPAD (DCS)   -  __DISCONTINUED  

    View Product Details
  • Controller, Vibitory Cube

    Controller, Vibitory Cube

    Used on Vibratorysorting equipment for adjustment of vibration by limiting power to coil (1119-001)

    View Product Details
  • Controller, Vibitory Cube w/Full Chute Pause Sensor

    Controller, Vibitory Cube w/Full Chute Pause Sensor

    Used on Vibratorysorting equipment for adjustment of vibration by limiting power to coil (1119-001). Come with a Fiber Optic Amplifie,for pausing the bowl when the chute is full. Fiber Not Included

    View Product Details
  • 4050-122

    DC DRIVE, STAND ALONE

    For operating 90VDC Motors. Used on Conveyors and Turntables. With cords, power and motor. Stand Alone DC Drive: Nema_4x, 115/240Vac, to 90/180Vdc output, 1/50 to 1hp DC Motor. (End user required to supply Main Disocnnect,...

    View Product Details
  • 1211-145

    DC DRIVE, STAND ALONE, 115/240VAC

    KBIC Control Box Standard Drive For operating 90VDC Motors. Used on Conveyors, Separator Belts, Wrap Belts, and Turntables Stand Alone DC Drive: Nema_4x, 115/240Vac, to 90/180Vdc output, 1/50 to 1hp DC Motor. (End user...

    View Product Details
  • 1211-001

    DC MOTOR DRIVE, 120VAC BOARD KBIC

    DC Motor Control Board For DC motor control on cappers, conveyors, and similar machines. Board controls min/max and acceleration of motor speed range. Plug in resistors from 1/100 to 1 HP (see chart below). Horse Power...

    View Product Details
  • DC Motor Drive, 230VAC Board KBIC

    DC Motor Drive, 230VAC Board KBIC

    For DC motor control on cappers, conveyors, and similar machines. Board controls min/max and acceleration of motor speed range. Plug in resistors from 1/100 to 1 HP (see chart below). Horse Power Resistor is NOT included...

    View Product Details
  • 1211-005

    DC MOTOR DRIVE, HORSE POWER RESISTORS, FOR KBIC BOARDS

    DC Motor Control Board Resistor Each KBIC Board needs a horse power resister, sized for the motor.

    View Product Details
  • DC Motor Drive, Terminal and Signal Board

    DC Motor Drive, Terminal and Signal Board

    KBIC: Barrier Terminal, and Analog Board Combo: Can be used on all standard KBIC Boards, to control Speed for 0 to 10Vdc Signal for Maple Fillers.

    View Product Details
  • Digital Pressure Controller

    Digital Pressure Controller

    Digital pressure switch, used for setting pressure on pressure fillers.

    View Product Details
  • Door Mounting Kit

    Door Mounting Kit

    Mounting kit for the Digital Pressure Controller.

    View Product Details
  • MICRO 1200, 16-POINT OUTPUT CARD

    MICRO 1200, 16-POINT OUTPUT CARD

    A.B.1200 Micro PLC (16 point Output card) (24Vdc, Sourcing Module):

    View Product Details

  • Pages:
  • 1
  • 2