Loading... Please wait...

Motors & Pumps

  • ASSEMBLY, 1/2" X 3/4" PNUMATIC PUMP CONTROL

    ASSEMBLY, 1/2" X 3/4" PNUMATIC PUMP CONTROL

    ASSEMBLY, 1/2" X 3/4" PNUMATIC PUMP CONTROL Used on Air Diaphram Pumps, to turn the pump on and off with the check valves.

    View Product Details
  • PULLEY, IDLER

    PULLEY, IDLER

    PULLEY, IDLER Pump Idler Pulley

    View Product Details
  • PULLEY, 5/8 BORE TIMING (14L100)

    PULLEY, 5/8 BORE TIMING (14L100)

    PULLEY, 5/8 BORE TIMING (14L100) Used on pump modules, for pump fillers

    View Product Details
  • Motor, 3/4 HP 220/480V 3PH 60HZ

    Motor, 3/4 HP 220/480V 3PH 60HZ

    Used on Pump Fillers, to drive the fill head pumps

    View Product Details
  • 1126-108

    PUMP, 24GPM MOYNO 35601 BUNA ELAST.

    Pump, Progressive Cavity 24GPM Used on filling machines for fill head dispensing and product supply. Dispenses products in excess of 20,000 CP. Operation limit from 100-1750RPM.

    View Product Details
  • 1126-010

    PUMP, BUNA 15 GPM MOYNO

    Pump, Progressive Cavity 15GPM Used on filling machines for fill head dispensing and product supply. Dispenses products in excess of 20,000 CP. Operation limit from 100-1750RPM.   Blue: Buna Gold: EPDM Green:...

    View Product Details
  • 1076-038

    PULLEY, FILLER PUMP DOUBLE BELT

    Used on Pump Fillers, for the pulley on the motor, to drive (2) pumps.

    View Product Details
  • 1211-005

    DC MOTOR DRIVE, HORSE POWER RESISTORS, FOR KBIC BOARDS

    DC Motor Control Board Resistor Each KBIC Board needs a horse power resister, sized for the motor.

    View Product Details
  • 1211-001

    DC MOTOR DRIVE, 120VAC BOARD KBIC

    DC Motor Control Board For DC motor control on cappers, conveyors, and similar machines. Board controls min/max and acceleration of motor speed range. Plug in resistors from 1/100 to 1 HP (see chart below). Horse Power...

    View Product Details
  • 5047-580

    WELDMENT, JACK MOUNT STUD

    WELDMENT, JACK MT. STUD Used on power height jacks for cappers

    View Product Details
  • 1087-002

    ACTUATOR, POWER HEIGHT 110V

    Used for electric power height adjustment of fill head bar on fillers. Also used on 2 Station Cappers, 3 Station Cappers, & Snap Cappers for heigth adjustment 12.10 LBS

    View Product Details