E-PAK Machinery: New Products - Gear Boxes, Motors, & Drives

MOTOR, 1/2HP,90VDC,WASHDOWN,56CFACE

Thu, 26 Oct 2023 15:28:02 +0000

MOTOR, 1/2HP,90VDC,WASH DOWN, 56CFACE

Motor for Conveyors.

MOTOR, 1/2HP, 1750RPM, 90VDC

Thu, 14 Jun 2018 11:11:34 +0000

Motor, 1/2HP, 1750RPM, 90VDC

This motor is used on APACKS Conveyors & Cappers

Use the E-PAK Part Number 1212-103

Price: $399.00

SEAL, GEAR BOX OUTPUT SHAFT

Mon, 09 Feb 2015 14:46:03 +0000

SEAL, GEAR BOX OUTPUT SHAFT

USE ON 1092-100 AND 1092-108

Price: $0.00

SEAL, GEAR BOX INPUT SHAFT

Mon, 09 Feb 2015 14:44:36 +0000

SEAL, GEAR BOX INPUT SHAFT

USE ON 1092-100 AND 1092-108

Price: $0.00

COUPLING, 3/4" BORE LOVEJOY

Tue, 11 Nov 2014 11:04:58 +0000

Price: $7.00

DC MOTOR DRIVE, HORSE POWER RESISTORS, FOR KBIC BOARDS

Fri, 31 May 2013 15:48:28 +0000

DC Motor Control Board Resistor

Each KBIC Board needs a horse power resister, sized for the motor.

Price: $4.50

DC MOTOR DRIVE, 120VAC BOARD KBIC

Fri, 31 May 2013 15:44:17 +0000

DC Motor Control Board

For DC motor control on cappers, conveyors, and similar machines. Board controls min/max and acceleration of motor speed range. Plug in resistors from 1/100 to 1 HP (see chart below).

Horse Power Resistor is NOT included.

Price: $108.00

GEARBOX, Y1 ZEROMAX

Fri, 17 May 2013 15:09:58 +0000

Manual speed controller used for adjusting the speed on AC drive conveyors.

GEARBOX, JK-3

Fri, 17 May 2013 15:08:28 +0000

Used for speed regulation on AC motor control use on AC drive turntables and conveyors. 0-400RPM when used with 1800RPM motor. Motor direction: both clockwise and counter clockwise.

Price: $1,105.00

GEARBOX, JK-2

Fri, 17 May 2013 15:07:15 +0000

Used for speed regulation on AC motor control use on AC drive turntables and conveyors. 0-400RPM when used with 1800RPM motor. Motor direction: clockwise.

Price: $780.00