Electrical Parts

Jack, Power Height Actuator

Part No:1087-002

Jack, Power Height Actuator Used for electric power height adjustment of fill head bar. 700lb. capacity. 110VAC 1/10HP 1.6AMP

Motor, Wrap Belt A Right to Left

Part No:1212-055

Motor, Wrap Belt A Right to Left Used on labelers as a part of after application wipe-down wrap belt unit.

Motor, Wrap Belt A Left to Right

Part No:1212-005

Motor, Wrap Belt A Left to Right Used on labelers as a part of after application wipe-down wrap belt unit.

MOTOR, 1/2 HP 90RPM

Part No:1212-065

MOTOR, 1/2 HP 90RPM Used on 4 Station Cappers (Gripper Belts)

Motor, Wrap Belt B

Part No:1212-074

Motor, Wrap Belt B Used on labelers as a part of after application wipe-down wrap belt unit, and belt transfer assemblies.

Motor, 102RPM 90VDC, 1/30HP

Part No:1212-003

Motor, 102RPM 90VDC, 1/30HP Used on labelers as a part of after application wipe-down foam rollers, and belt transfer assemblies (high speed).

Float, S.S. 316

Part No:1216-013

Float, S.S. 316 Used on filling machines for reservoir level control. The dual acting float control provides a back-up safety float to reduce the possibility of over-fill.

Float, Poly Assembly

Part No:5036-008

Float, Poly Assembly Used on corrosive resistant filling machines for reservoir level control. The dual acting float control provides a back-up safety to reduce the possibility of over-fill.

DCS Controller, Keypad Operator Interface

Part No:1204-002

DCS Controller, Keypad Operator Interface Used on filling machines for operator adjusted set points. Designed to easily accommodate adjustments to fill time, indexing time, conveyor, cycle-time, and many others.

DCS Controller, Keypad Operator Interface, (Re-conditioned)

Part No:1204-032

DCS Controller, Keypad Operator Interface, (Re-conditioned) Used on filling machines for operator adjusted set points. Designed to easily accommodate adjustments to fill time, indexing time, conveyor, cycle-time, and many others. We rarely have them in stock.

DCS Controller, Re-conditioning YOUR Controller

Part No:1204-015

DCS Controller, Re-conditioning YOUR Controller You send your DCS Controller in and we have it re-conditioned. The Hardware and software is brought up to date with todays DCS. It comes with a one year Warranty.

DCS Controller, Keypad Operator Interface (Spanish)

Part No:1204-083

DCS Controller, Keypad Operator Interface (Spanish) Used on filling machines for operator adjusted set points. Designed to easily accommodate adjustments to fill time, indexing time, conveyor, cycle-time, and many others. The display abd keyboardreinSpanish.

DCS Controller, 1AMP Output Module

Part No:1204-003

DCS Controller, 1AMP Output Module Module for the DCS. Each output needs one for the output to operate.

DCS Controller, Keypad

Part No:1204-004

DCS Controller, Keypad

DCS Controlleer, Clear Cover

Part No:1204-005

DCS Controlleer, Clear Cover For corrosive environments

DCS Controller, Dolphin Bezel (FRAME)

Part No:1204-006

DCS Controller, Dolphin Bezel (FRAME) The Frame around the DCS controller.

Bracket, Fiber Optic Assembly

Part No:5048-001

Bracket, Fiber Optic Assembly Used for Fiber Cables

Bracket, Photo Eye

Part No:5047-512

Bracket, Photo Eye Usedfor Omron and Seeka Eyes

Bracket, Reflector

Part No:5050-123

Bracket, Reflector

Hole Plug

Part No:1205-050

Hole Plug Used for plugging electrical enclosure holes for 22.5mm switches Gray

Motor, 1/2HP, 40RPM, 90VDC

Part No:1212-105

Motor, 1/2HP, 40RPM, 90VDC Motor used on the 3 Station Cappers (Gripper Belt Drive)

MOTOR, 1/2 HP 90V 850RPM

Part No:1212-080

MOTOR, 1/2 HP 90V 850RPM Used for a 3 Station Capper (Spindle Drive)

Motor, Leeson 90 VDC, 1/4 HP

Part No:1212-196

Motor, Leeson 90 VDC, 1/4 HP Used on Turntables, Elevators, & Pocket Sorters

Reliance Control Box Standard Drive

Part No:4050-122

Reliance Control Box Standard Drive For operating 90VDC Motors. Used on Conveyors and Turntables

Controller, Vibitory Cube

Part No:1206-010

Controller, Vibitory Cube Used on Vibratorysorting equipment for adjustment of vibration by limiting power to coil (1119-001)

Controller, Vibitory Cube w/Full Chute Pause Sensor

Part No:1206-110

Controller, Vibitory Cube Used on Vibratorysorting equipment for adjustment of vibration by limiting power to coil (1119-001). Come with a Fiber Optic Amplifie,for pausing the bowl when the chute is full. Fiber Not Included

Motor, 1/2HP, 1750RPM, 90VDC

Part No:1212-103

Motor, 1/2HP, 1750RPM, 90VDC Motor drive for conveyors and 4 Station Capper, (sometime the 3 Staion Capper) (Spindle Drive).

Sensor, Photoelectric Switch

Part No:1215-003

Sensor, Photoelectric Switch Used for hazardous location and chute bowl Full Chute Pause.

Fiber Cable, FU-6F

Part No:1215-004

Fiber Cable, FU-6F Fiber optic sensor used with filling, capping, labeling, and many other packaging components

Fiber Cable, FU-7F

Part No:1215-005

Fiber Cable, FU-7F Fiber optic sensor used with filling, capping, labeling, and many other packaging components

Sensor, Photo Optic Seeka

Part No:1215-009

Sensor, Photo Optic Seeka Used on filling machines for product detect/count/bottle-in-place, and product detect jam.

Sensor, Retro-Reflective

Part No:1215-016

Sensor, Retro-Reflective Omron photoelectric switch. Sensing distance 600cm. This sensor uses a reflector.

Sensor, Visolux

Part No:1215-032

Sensor, Visolux Used on clutch/brake labelers for label positioning. This sensor will not work with mylar labels.

Sensor, Omron

Part No:1215-040

Sensor, Omron Photoelectric switch, sensing distance 10cm. Used on clutch/brake labelers for sensing the bottles

Relay, G2R, 115VAC

Part No:1214-007

Relay, G2R, 115VAC Used for float box controls and conveyor inhibit relay.

Relay, G2R, 24VDC

Part No:1214-020

Relay, G2R, 24VDC Used for float box controls and conveyor inhibit relay.

Relay, LY2, 115VAC

Part No:1214-009

Relay, LY2, 115VAC

Relay, LY2, 24VDC

Part No:1214-042

Relay, LY2, 24VDC

Relay, LY4, 24VDC

Part No:1214-043

Relay, LY4, 24VDC

Relay, LY4, 115VAC

Part No:1214-013

Relay, LY4, 115VAC

Relay, G7L (G5D)

Part No:1214-015

Relay, G7L (G5D) Single pole relay primarily used for switching of AC conveyors by the DCS control unit and filler control box.

Socket, Relay G2R

Part No:1214-008

Socket, Relay G2R For single pole G2R relays

Socket, Relay LY2

Part No:1214-033

Socket, Relay LY2 For Double Pole LY2 Relays

Socket, Relay LY4

Part No:1214-014

Socket, Relay LY4 For 4 Pole LY4 Relays

Switch, Pressure Regulator

Part No:1216-401

Switch, Pressure Regulator Used for filling machines to maintain proper tank pressure. The pressure regulating gauge signals an air valve when additional pressure is needed.

Controller, Omron SP10-DR-A

Part No:1204-016

Controller, Omron SP10-DR-A Programmable logic controller used for control of various systems primarily on clutch/brake labelers.

Timer, 1/10th Second

Part No:1217-004

Timer, 1/10th Second Used on filling machined with independent adjustable digital timers.

Switch, E-Stop Pushbutton

Part No:1216-027

Switch, E-Stop Pushbutton Emergency stop button for various machines

Speed Pot Control (30mm)

Part No:1206-014

Speed Pot Control (30mm) 5k rotary speed pot, 3/4 turn

Speed Pot Control (22mm)

Part No:1206-108

Speed Pot Control (22mm) 5k rotary speed pot, 3/4 turn.

Speed Pot Digital Display

Part No:1206-001

Speed Pot Digital Display 5k analog, speed adjustment pot used on capping machines and other E-PAK equipment.

ISR – Intrinsically Safe Relay

Part No:1206-099

ISR – Intrinsically Safe Relay Intrinsically safe switch used for float control system.

Clutch/Brake Drive Board

Part No:1213-001

Clutch/Brake Drive Board Used on clutch/brake labeler. Power unit supplied control power alternating from brake to clutch. Warner

DC Motor Control Board (115VAC)

Part No:1211-001

DC Motor Control Board For DC motor control on cappers, conveyors, and similar machines. Board controls min/max and acceleration of motor speed range. Plug in resistors from 1/100 to 1 HP (see chart below).

DC Motor Control Board (220VAC)

Part No:1211-002

DC Motor Control Board For DC motor control on cappers, conveyors, and similar machines. Board controls min/max and acceleration of motor speed range. Plug in resistors from 1/100 to 1 HP (see chart below).

DC Motor Control Board Resistor

Part No:Resistor Chart

DC Motor Control Board Resistor 1211-003 1 HP Resistor 1211-004 3/4 HP Resistor 1211-005 1/2 HP Resistor 1211-006 1/3 HP Resistor 1211-007 1/4 HP Resistor 1211-008 1/8 HP Resistor 1211-009 1/12 HP Resistor 1211-0010 1/20 HP Resistor 1211-0011 1/30 HP Resistor 1211-0012 1 1/2 HP Resistor

DC Motor Terminal and Signal Board

Part No:1211-017

DC Motor Terminal and Signal Board KBIC: Barrier Terminal, and Analog Board Combo: Can be used on all standard KBIC Boards, to control Speed for 0 to 10Vdc Signal for Nematorn Fillers…

Motor, 3/4 HP 220/480V 3PH 60HZ

Part No:1212-070

Motor, 3/4 HP 220/480V 3PH 60HZ Used on Pump Fillers, to drive the fill head pumps