Mounting Assembly, Aluminum Rail
Part No:5027-019
Mounting Assembly, Aluminum Rail Mounting bracket for Aluminum Conveyor Rail, Includes: (2) 1000-453 “L
Conveyor Parts Parts
Bracket, Heavy Duty VG203L
Part No:1000-629
Bracket, Heavy Duty VG203L The Bracket boot for the Stainless steel rail kit
Mounting Assembly, Stainless Steel Rail (Double Rail Kit)
Part No:5027-018
Mounting Assembly, Stainless Steel Rail (Double Rail Kit) Mounting bracket for Stainless Conveyor Rail, Includes: (1) 1000-629 Bracket Boot (1) 1066-052 Double Rail Clamp (1) 1011-443 Cross Block (1) 1020-136 8
Bracket, Weldment, Accessory Rail (Bimba RL)
Part No:5047-518
Weldment, Accessory Rail (Bimba RL) Rail used for mounting Air Cylinders
Wear Strip, J-Leg 1.5″ Wide
Part No:1130-039
Wear Strip, J-Leg 1.5" Wide Convyor wear strip for under the conveyor belt. Upper conveyor shell.
Reliance Control Box Standard Drive
Part No:4050-122
Reliance Control Box Standard Drive For operating 90VDC Motors. Used on Conveyors and Turntables
Chain, 4 1/2″ 2000 Series
Part No:1059-009
Chain, 4 1/2" 2000 Series Table top conveyor chain. Corrosive resistant polypropylene construction with polypropylene connector pins.
Chain, 7 1/2″ 2000 Series
Part No:1059-010
Chain, 7 1/2" 2000 Series Table top conveyor chain. Corrosive resistant polypropylene construction with polypropylene connector pins.
Chain, 10″ 2000 Series
Part No:1059-011
Chain, 4 1/2" 2000 Series Table top conveyor chain. Corrosive resistant polypropylene construction with polypropylene connector pins.
Chain, 4 1/2″ Gray
Part No:1059-006
Chain, 4 1/2" Gray Table top flat surface conveyor chain for straight conveyors.
Chain, 7 1/2″ Gray
Part No:1059-007
Chain, 7 1/2" Gray Table top flat surface conveyor chain for straight conveyors.
Chain, 10″ Gray
Part No:1059-008
Chain, 10" Gray Table top flat surface conveyor chain for straight conveyors.
Sprocket, Delrin
Part No:1037-071
Sprocket, Delrin Sprocket for conveyor. Delrin pulley for Gray chain conveyor.
Sprocket, Conveyor Drive
Part No:1037-069
Sprocket, Conveyor Drive Drive pulley for 2000 series chain conveyor
Adapter, Sprocket, 1″ Bore
Part No:1044-042
Adapter, Sprocket, 1" Bore Drive sprocket (1037-069) – Drive Shaft adapter used on Conveyors. Sprocket (1037-146) – Drive Shaft adaptor used on Elevator Sroters.
Motor, 1/2HP, 1750RPM, 90VDC
Part No:1212-103
Motor, 1/2HP, 1750RPM, 90VDC Motor drive for conveyors and 4 Station Capper, (sometime the 3 Staion Capper) (Spindle Drive).
Gear Reducer, 40:1
Part No:1092-049
Gear Reducer, 40:1 Gear reducer used for conveyor drive. Still Avalible,but has been replaced by: 1092-100
Gear Reducer, 40:1 Bravo
Part No:1092-100
Gear Reducer, 40:1 Bravo Gear reducer used for conveyor drive. USED WITH 1039-509 – COVER, SHAFT FOR LEESON REDUCERS
Gearbox, JK-1
Part No:1092-009
Gearbox, JK-1 Used for speed regulation on AC motor control use on AC drive turntables and conveyors. 0-400RPM when used with 1800RPM motor. Motor direction: counter clockwise.
Gearbox, JK-2
Part No:1092-011
Gearbox, JK-2 Used for speed regulation on AC motor control use on AC drive turntables and conveyors. 0-400RPM when used with 1800RPM motor. Motor direction: clockwise.
Gearbox, JK-3
Part No:1092-010
Gearbox, JK-3 Used for speed regulation on AC motor control use on AC drive turntables and conveyors. 0-400RPM when used with 1800RPM motor. Motor direction: both clockwise and counter clockwise.
Gearbox, JY1 Zeromax
Part No:1092-015
Gearbox, JY1 Zeromax Manual speed controller used for adjusting the speed on AC drive conveyors.
Coupling, Insert
Part No:1001-041
Coupling, Insert Fits inside the Lovejoy coupling between the motor and gearbox.
Bracket, 11GA. “L” Slot
Part No:1000-001
Bracket, 11GA. "L" Slot 304 stainless steel, heavy duty bracket for conveyor railing and turntables.
Bracket, 304SS Small Bimba “L”
Part No:1000-441
Bracket, 304SS Small Bimba "L" 304 stainless steel, heavy duty bracket for indexing gates and mounting eyes.
Bracket, 12GA. Std. “L”
Part No:1000-453
Bracket, 12GA. Std. "L" 304 stainless steel, standard bracket for conveyor railing and turntables.
Rail, Stainless Conveyor (10 ft)
Part No:1009-312
Rail, Stainless Conveyor (10 ft) 10’ of stainless steel railing with poly inner guide for conveyors.
Rail, Aluminum Conveyor (10ft)
Part No:1009-311
Rail, Aluminum Conveyor (10ft) Aluminum railing without poly inner guide for conveyors.
Wear Strip, Poly for Aluminum Conveyor Rail
Part No:1130-001
Wear Strip, Poly for Aluminum Conveyor Rail Replacement of poly inner railing guide. Also convyor wear strip for under the conveyor belt.
Wear Strip, Poly VG J-Leg, (10 ft)
Part No:1130-002
Wear Strip, Poly VG J-Leg, (10 ft) Convyor wear strip for under the conveyor belt. Lower conveyor shell.
Mounting Assembly, Stainless Steel Rail (Single Rail Kit)
Part No:5027-042
Mounting Assembly, Stainless Steel Rail (Single Rail Kit) Mounting bracket for Stainless Conveyor Rail, Includes: (1) 1000-629 Bracket Boot (1) 1066-049 Single Rail Clamp (1) 1012-1500 Single Rail Clamp Plate (1) 1011-443 Cross Block (1) 1020-136 8" Shaft (1) 1020-134 6" Shaft (1) 3/8" x 1/4" Bolt (1) 3/8" Lock Washer (1) 3/8" Flat Washer
Clamp, SS Dbl Rail Connector
Part No:1066-052
Clamp, SS Dbl Rail Connector For double rail guides on conveyors and turntables. Used for Stainless Steel Rail.
Clamp, Single Rail VG 016-02
Part No:1066-049
Clamp, Single Rail VG 016-02 For single rail guides on conveyors and turntables. Used for Stainless Steel Rail. This part requires a single rail clap plate 1012-150
Clamp Backing Plate, Single Rail, VG Rail Clamp
Part No:1012-1500
Clamp Backing Plate, Single Rail, VG Rail Clamp Used with single rail clamp 1066-049
Relay, G7L (G5D)
Part No:1214-015
Relay, G7L (G5D) Single pole relay primarily used for switching of AC conveyors by the DCS control unit and filler control box.
Wear Strip, J-Leg 1.5 Wide
Part No:1130-040
Wear Strip, J-Leg 1.5 Wide Convyor wear strip for under the conveyor belt. Upper conveyor shell.
Wear Strip, Rail, J-Leg L Channel
Part No:1009-455
Wear Strip, Rail, J-Leg L Channel Convyor wear strip for under the conveyor belt. Upper conveyor shell.
Chain, 4 1/2″ 2000 Series
Part No:1059-009
Chain, 4 1/2" 2000 Series Table top conveyor chain. Corrosive resistant polypropylene construction with polypropylene connector pins.
Chain, 7 1/2″ 2000 Series
Part No:1059-010
Chain, 7 1/2" 2000 Series Table top conveyor chain. Corrosive resistant polypropylene construction with polypropylene connector pins.
Chain, 10″ 2000 Series
Part No:1059-011
Chain, 4 1/2" 2000 Series Table top conveyor chain. Corrosive resistant polypropylene construction with polypropylene connector pins.
Chain, 4 1/2″ Gray
Part No:1059-006
Chain, 4 1/2" Gray Table top flat surface conveyor chain for straight conveyors.
Chain, 7 1/2″ Gray
Part No:1059-007
Chain, 7 1/2" Gray Table top flat surface conveyor chain for straight conveyors.
Chain, 10″ Gray
Part No:1059-008
Chain, 10" Gray Table top flat surface conveyor chain for straight conveyors.
Sprocket, Delrin
Part No:1037-071
Sprocket, Delrin Sprocket for conveyor. Delrin pulley for Gray chain conveyor.
Sprocket, Conveyor Drive
Part No:1037-069
Sprocket, Conveyor Drive Drive pulley for 2000 series chain conveyor
Adapter, Sprocket, 1″ Bore
Part No:1044-042
Adapter, Sprocket, 1" Bore Drive sprocket (1037-069) – Drive Shaft adapter used on Conveyors. Sprocket (1037-146) – Drive Shaft adaptor used on Elevator Sroters.
Gear Reducer, 40:1
Part No:1092-049
Gear Reducer, 40:1 Gear reducer used for conveyor drive. Still Avalible,but has been replaced by: 1092-100
Gear Reducer, 40:1 Bravo
Part No:1092-100
Gear Reducer, 40:1 Bravo Gear reducer used for conveyor drive. USED WITH 1039-509 – COVER, SHAFT FOR LEESON REDUCERS
Gearbox, JK-1
Part No:1092-009
Gearbox, JK-1 Used for speed regulation on AC motor control use on AC drive turntables and conveyors. 0-400RPM when used with 1800RPM motor. Motor direction: counter clockwise.
Gearbox, JK-2
Part No:1092-011
Gearbox, JK-2 Used for speed regulation on AC motor control use on AC drive turntables and conveyors. 0-400RPM when used with 1800RPM motor. Motor direction: clockwise.
Gearbox, JK-3
Part No:1092-010
Gearbox, JK-3 Used for speed regulation on AC motor control use on AC drive turntables and conveyors. 0-400RPM when used with 1800RPM motor. Motor direction: both clockwise and counter clockwise.
Gearbox, JY1 Zeromax
Part No:1092-015
Gearbox, JY1 Zeromax Manual speed controller used for adjusting the speed on AC drive conveyors.
Motor, 1/2HP, 1750RPM, 90VDC
Part No:1212-103
Motor, 1/2HP, 1750RPM, 90VDC Motor drive for conveyors and 4 Station Capper, (sometime the 3 Staion Capper) (Spindle Drive).
Mounting Assembly, Aluminum Rail
Part No:5027-019
Mounting Assembly, Aluminum Rail Mounting bracket for Aluminum Conveyor Rail, Includes: (2) 1000-453 “L
Bracket, Heavy Duty VG203L
Part No:1000-629
Bracket, Heavy Duty VG203L The Bracket boot for the Stainless steel rail kit
Mounting Assembly, Stainless Steel Rail (Double Rail Kit)
Part No:5027-018
Mounting Assembly, Stainless Steel Rail (Double Rail Kit) Mounting bracket for Stainless Conveyor Rail, Includes: (1) 1000-629 Bracket Boot (1) 1066-052 Double Rail Clamp (1) 1011-443 Cross Block (1) 1020-136 8
Bracket, 11GA. “L” Slot
Part No:1000-001
Bracket, 11GA. "L" Slot 304 stainless steel, heavy duty bracket for conveyor railing and turntables.
Bracket, 12GA. Std. “L”
Part No:1000-453
Bracket, 12GA. Std. "L" 304 stainless steel, standard bracket for conveyor railing and turntables.
Rail, Stainless Conveyor (10 ft)
Part No:1009-312
Rail, Stainless Conveyor (10 ft) 10’ of stainless steel railing with poly inner guide for conveyors.
Rail, Aluminum Conveyor (10ft)
Part No:1009-311
Rail, Aluminum Conveyor (10ft) Aluminum railing without poly inner guide for conveyors.
Wear Strip, Poly for Aluminum Conveyor Rail
Part No:1130-001
Wear Strip, Poly for Aluminum Conveyor Rail Replacement of poly inner railing guide. Also convyor wear strip for under the conveyor belt.
Mounting Assembly, Stainless Steel Rail (Single Rail Kit)
Part No:5027-042
Mounting Assembly, Stainless Steel Rail (Single Rail Kit) Mounting bracket for Stainless Conveyor Rail, Includes: (1) 1000-629 Bracket Boot (1) 1066-049 Single Rail Clamp (1) 1012-1500 Single Rail Clamp Plate (1) 1011-443 Cross Block (1) 1020-136 8" Shaft (1) 1020-134 6" Shaft (1) 3/8" x 1/4" Bolt (1) 3/8" Lock Washer (1) 3/8" Flat Washer
Clamp, SS Dbl Rail Connector
Part No:1066-052
Clamp, SS Dbl Rail Connector For double rail guides on conveyors and turntables. Used for Stainless Steel Rail.
Clamp, Single Rail VG 016-02
Part No:1066-049
Clamp, Single Rail VG 016-02 For single rail guides on conveyors and turntables. Used for Stainless Steel Rail. This part requires a single rail clap plate 1012-150
Clamp Backing Plate, Single Rail, VG Rail Clamp
Part No:1012-1500
Clamp Backing Plate, Single Rail, VG Rail Clamp Used with single rail clamp 1066-049