Air Filter Regulator
Part No:1114-001
Air Filter Regulator Used on E-PAK fillers, bowls, and molten path station. 1/4NPT inlet/outlet with 1/8NPT for gauges and aux. air. Provides enough filtration for most low volume pneumatic applications.
Capper Parts Parts
Jack, Power Height Actuator
Part No:1087-002
Jack, Power Height Actuator Used for electric power height adjustment of fill head bar. 700lb. capacity. 110VAC 1/10HP 1.6AMP
Chain, #25 Nickel Plated
Part No:1059-029
Chain, #25 Nickel Plated Low noise chain used on clutch/brake labelers.
Chain #25 Master Link Nickel Plated
Part No:1059-030
Chain #25 Master Link Nickel Plated Master link for low noise labeler chain.
Pulley, Side Belt Idler 2 Station
Part No:5039-012
Pulley, Side Belt Idler 2 Station Used on labelers as part of the belt separator sprocket wheel for gripping belts (Z1099-091 & 092). Also used on 2 Station Cappers for a gripper belt pulley
Pulley, Side Belt Drive 2 Station
Part No:1076-068
Pulley, Side Belt Drive 2 Station Used on labelers as part of the belt separator sprocket wheel for gripping belts (Z1099-091 & 092). Also used on 2 Station Cappers for a gripper belt pulley
Bearing Block Assembly
Part No:5020-028
Bearing Block Assembly Used on capping machines for idle pulley mounting and belt tension adjustment. (For the Gripper Belt Assembly)
Belt, White Snap Capper, Complete
Part No:5052-073
Belt, White Snap Capper, Complete Used on snap capping machines for the application of snap caps. Material designed for reduced markings of bottle.
Belt, White Snap Capper
Part No:1099-094
Belt, White Snap Capper Used on snap capping machines for the application of snap caps. Material designed for reduced markings of bottle.
Gearbox, Small Left Tolomatic
Part No:1092-014
Gearbox, Small Left Tolomatic Right angle gearbox that drives the spindles on the capper.
Chuck, Stem Assembly #60
Part No:5003-091
Chuck, Stem Assembly #60 Used on handheld chuck capping machines with insert wear material. (Cap Sizes: 40mm-80mm)
Chuck, Stem Assembly #50
Part No:5003-092
Chuck, Stem Assembly #50 Used on handheld chuck capping machines with insert wear material. (Cap Sizes: 30mm-50mm)
Chuck, Stem Assembly #40
Part No:5003-093
Chuck, Stem Assembly #40 Used on handheld chuck capping machines with insert wear material. (Cap Sizes: 25mm-40mm)
Chuck, Stem Assembly #30
Part No:5003-094
Chuck, Stem Assembly #30 Used on handheld chuck capping machines with insert wear material. (Cap Sizes: 25mm-35mm)
Chuck, Stem Assembly #25
Part No:5003-095
Chuck, Stem Assembly #25 Used on handheld chuck capping machines with insert wear material. (Cap Sizes: 15mm-30mm)
Clutch, Horton Air
Part No:1093-007
Clutch, Horton Air This Clutch is used on the older 3 Station Capper, to control the third setof spindles.
Insert, Chuck #60
Part No:1032-056
Insert, Chuck #60 Used on handheld chuck capping machines. Compound material designed for reduced markings of cap. (Cap Sizes: 40mm-60mm)
Insert, Chuck #50
Part No:1032-055
Insert, Chuck #50 Used on handheld chuck capping machines. Compound material designed for reduced markings of cap. (Cap Sizes: 30mm-50mm)
Insert, Chuck #40
Part No:1032-054
Insert, Chuck #40 Used on handheld chuck capping machines. Compound material designed for reduced markings of cap. (Cap Sizes: 25mm-40mm)
Insert, Chuck #30
Part No:1032-053
Insert, Chuck #30 Used on handheld chuck capping machines. Compound material designed for reduced markings of cap. (Cap Sizes: 25mm-35mm)
Insert, Chuck #25
Part No:1032-052
Insert, Chuck #25 Used on handheld chuck capping machines. Compound material designed for reduced markings of cap. (Cap Sizes: 15mm-30mm)
Gripper Disc, Yellow
Part No:1016-099
Gripper Disc, Yellow Standard gripper, also supplied with OEM capper. Used on capping machines for the spindle disk wear material. Compound material designed for reduced markings of cap. 55 durometer, medium.
Gripper Disc, Tan
Part No:1016-098
Gripper Disc, Tan Used on capping machines for the spindle disk wear material. Compound material designed for reduced markings of cap. 70 durometer, hard.
Gripper Disc, Red
Part No:1016-097
Gripper Disc, Red Used on capping machines for the spindle disk wear material. Compound material designed for reduced markings of cap. 50 durometer, medium.
Gripper Disc, Blue
Part No:1016-096
Gripper Disc, Blue Used on capping machines for the spindle disk wear material. Compound material designed for reduced markings of cap. 60 durometer, medium.
Gripper Disc, Clear (Hard)
Part No:1016-095
Gripper Disc, Clear (Hard) Used on capping machines for the spindle disk wear material. Compound material designed for reduced markings of cap. 60 durometer, medium.
Gripper Disc, Clear (Soft)
Part No:1016-109
Gripper Disc, Clear (Soft) Used on capping machines for the spindle disk wear material. Compound material designed for reduced markings of cap. 20 durometer, soft.
Gripper Disc, Grey
Part No:1016-111
Gripper Disc, Grey Used on capping machines for the spindle disk wear material. Compound material designed for reduced markings of cap. 70 durometer, hard.
Gripper Disc, White
Part No:1016-112
Gripper Disc, White Used on capping machines for the spindle disk wear material. Compound material designed for reduced markings of cap. 72 durometer, hard.
Air Cylinder, F-Style
Part No:1113-007
Air Cylinder, F-Style The tip of the Piston Rod needs to be cut off.
Air Fitting, Brass 10/32NPT x 1/4 Air
Part No:1124-058
Air Fitting, Brass 10/32NPT x 1/4 Air Used with the F-Style Cylinder (1113-007)
Capper, Spindle Wheel Retrofit Kit
Part No:5052-067
Capper, Spindle Wheel Retrofit Kit 6 spindle assemblies that mount to existing capper spindle shafts, significantly reducing changeover times.
Capper, Spindle Wheel Upgrade
Part No:5052-112
Capper, Spindle Wheel Upgrade 1 spindle assemblies that mount to existing capper spindle shafts.
Tensioner, Reel (HH)
Part No:1101-001
Tensioner, Reel (HH) Used for handheld chuck capper for ease of recoil.
Clutch, Poly Pneumatic Capper Spindles
Part No:1093-017
Clutch, Poly Pneumatic Capper Spindles Used on New 3 Station & 4 Station Capper. They are used on all but the first set of spindle assenblies.
Gearbox, Small Right Tolomatic
Part No:1092-013
Gearbox, Small Right Tolomatic Right angle gearbox that drives the spindles on the capper.
Gearbox, Large Right Tolomatic
Part No:1092-016
Gearbox, Large Right Tolomatic Right angle gearbox that drives the Gripper Belts on the capper.
Gearbox, Large Left Tolomatic
Part No:1092-017
Gearbox, Large Left Tolomatic Right angle gearbox that drives the Gripper Belts on the capper.
WELDMENT, JACK MT. STUD
Part No:5047-869
WELDMENT, JACK MT. STUD Used on power height jacks for cappers
Motor, 1/2HP, 40RPM, 90VDC
Part No:1212-105
Motor, 1/2HP, 40RPM, 90VDC Motor used on the 3 Station Cappers (Gripper Belt Drive)
MOTOR, 1/2 HP 90V 850RPM
Part No:1212-080
MOTOR, 1/2 HP 90V 850RPM Used for a 3 Station Capper (Spindle Drive)
CHUTE, CAP STABILIZER TONGUE (Extended)
Part No:1014-226
CHUTE, CAP STABILIZER TONGUE (Extended) New style Cap Chute
Plunger, Vlier Spring, POSI-HEX 10-32
Part No:1090-014
Plunger, Vlier Spring, POSI-HEX 10-32 Spring loaded plunger for the chute
Plunger, Vlier Spring, POSI-HEX 6-32
Part No:1090-012
Plunger, Vlier Spring, POSI-HEX 6-32 Spring loaded plunger for the chute
Air Fitting, Brass 1/8NPT x 1/8 Air (Grease Fitting)
Part No:1124-046
Air Fitting, Brass 1/8NPT x 1/8 Air (Grease Fitting) Used on Capper Grease Lines
Fitting, 304SS 1/8″ Grease Zert
Part No:1060-181
Fitting, 304SS 1/8" Grease Zert Uedfor capper grease lines
Tubing, Nylaflow 1/8″ High Pressure
Part No:1051-486
Tubing, Nylaflow 1/8" High Pressure Used on Cappers for grease line
Keystock, LG Tol-O-Matic Key
Part No:1132-007
Keystock, LG Tol-O-Matic Key Key for the Large Tol-O-Matic
Keystock, SM Tol-O-Matic Key
Part No:1132-008
Keystock, SM Tol-O-Matic Key Key used for the Small Tol-O-Matic
Motor, 1/2HP, 1750RPM, 90VDC
Part No:1212-103
Motor, 1/2HP, 1750RPM, 90VDC Motor drive for conveyors and 4 Station Capper, (sometime the 3 Staion Capper) (Spindle Drive).
Gauge, Back Mount 1/8NPT 0-160PSI
Part No:1208-001
Gauge, Back Mount 1/8NPT 0-160PSI Pressure gauge used on multiple machines.
Gripper Disc, Duo-durometer
Part No:CP-AB130Z
Gripper Disc, Duo-durometer Duo – 25 durometer outside, 70 durometer inside.
Belt, Gripper, 1 1/2″ x 1/4″,
Part No:1099-233
Belt, Gripper, 1 1/2" x 1/4", Used on 4 Station Cappers
Gear Reducer, 5:1 56C Face Inline
Part No:1092-091
Gear Reducer, 5:1 56C Face Inline Used on 4 Station Cappers
Wrap Belt, Tan
Part No:1099-099
Wrap Belt, Tan Used on labeling machines for wrap application for round container. Also used as special separator belts.
Wrap Belt, Black
Part No:1099-098
Wrap Belt, Black Used on labeling machines for wrap application for round container. Also used as special separator belts.
Wrap Belt, Blue
Part No:1099-095
Wrap Belt, Blue Common belt used on most labeling machines for wrap application for round container. Also used as special separator belts.
Belt, Blue Leather 5/8″
Part No:1099-100
Belt, Blue Leather 5/8" Used on clutch/brake labelers for supply roll tension clutching.
Belt, White Snap Capper, Complete
Part No:5052-073
Belt, White Snap Capper, Complete Used on snap capping machines for the application of snap caps. Material designed for reduced markings of bottle.
Belt, White Snap Capper
Part No:1099-094
Belt, White Snap Capper Used on snap capping machines for the application of snap caps. Material designed for reduced markings of bottle.
Belt, Gripper, 1 1/2″ x 1/4″,
Part No:1099-233
Belt, Gripper, 1 1/2" x 1/4", Used on 4 Station Cappers
Belt, 8″ Conv. Elevator
Part No:1099-138
Belt, 8" Conv. Elevator Used on Elevator Prefeeders (20ft per Elevator)
Belt, Fastner Clipper Pin Back
Part No:1099-123
Belt, Fastner Clipper Pin Back Used on Elevator Sorter Belts
Air Cylinder, Drip Tray
Part No:1113-001
Air Cylinder, Drip Tray 304 stainless steel body, 303 stainless steel high strength piston rod with low friction Buna-NBR and rod seal. Used for filling machine drip tray. 2
Air Cylinder, Bottle Grabber
Part No:1113-002
Air Cylinder, Bottle Grabber 304 stainless steel body, 303 stainless steel high strength piston rod with low friction Buna-NBR, and rod seal. Used for bottle grabber orientator. 1
Air Cylinder, Indexing
Part No:1113-026
Air Cylinder, Indexing 304 stainless steel body, 303 stainless steel high strength piston rod with low friction Buna-NBR, and rod seal. Used for Indexing. 4
