Nozzle, Poly Gooseneck Connector 1/2NPT x 1/2"Used for acid filling machines. Polyethylene composite construction. Used with 1/2" nozzle tips for directional flow  

Nozzle, Gooseneck Connector 3/8NPT x 1/2"Used with 1/2” nozzle tips for directional flow on filling machines. Acetal composite material. Industrial grade nozzle made from virgin FDA approved food grade material.  

Nozzle, Gooseneck Connector 1/4NPT x 1/4"Used with 1/4” nozzle tips for directional flow on filling machines. Acetal composite material. Industrial grade nozzle made from virgin FDA approved food grade material.  

Gooseneck ToolTool for easy installation and removal of gooseneck nozzle tips.   

Nozzle, Gooseneck 1/2" ChainUsed with 1/2” nozzle tips for directional flow on filling machines. Acetal composite material. Industrial grade nozzle made from virgin FDA approved food grade material.   

Nozzle, Gooseneck Tip 1/4" x 1/8"Used with 1/4” nozzle connectors for directional flow on filling machines. Acetal composite material. Industrial grade nozzle made from virgin FDA approved food grade material.  

Nozzle, Gooseneck Tip 1/4" x 1/16"Used with 1/4” nozzle connectors for directional flow on filling machines. Acetal composite material. Industrial grade nozzle made from virgin FDA approved food grade material.  

Nozzle, Reducer Tip 1/2" x 1/4"Used for acid filling machines. Polyethylene composite construction. Used to reduce 1/2" nozzle connectors to 1/4" nozzle connectors. 

Nozzle, Gooseneck Connector 1/2NPT x 1/2"Used with 1/2” nozzle tips for directional flow on filling machines. Acetal composite material. Industrial grade nozzle made from virgin FDA approved food grade material.  

Nozzle, Poly Gooseneck Tip 1/2" x 1/2"Used for acid filling machines. Polyethylene composite construction. Used with 1/2” nozzle connectors for directional flow. 

Nozzle, Poly Gooseneck Tip 1/2" x 3/8"Used for acid filling machines. Polyethylene composite construction. Used with 1/2” nozzle connectors for directional flow.  

Nozzle, Poly Gooseneck Tip 1/2" x 1/4"Used for acid filling machines. Polyethylene composite construction. Used with 1/2” nozzle connectors for directional flow.  

Nozzle, Poly Gooseneck Tip 1/4" x 1/8"Used for acid filling machines. Polyethylene composite construction. Used with 1/4” nozzle connectors for directional flow.  

Nozzle, Poly Gooseneck Tip 1/4" x 1/16"Used for acid filling machines. Polyethylene composite construction. Used with 1/4” nozzle connectors for directional flow.  

Nozzle, Gooseneck Tip 1/2" x 1/4"Used with 1/2” nozzle connectors for directional flow on filling machines. Acetal composite material. Industrial grade nozzle made from virgin FDA approved food grade material. 

Nozzle, Gooseneck Tip 1/4" x 1/4"Used with 1/4” nozzle connectors for directional flow on filling machines. Acetal composite material. Industrial grade nozzle made from virgin FDA approved food grade material.  

Tubing, Poly White .375" AirStandard tubing for air valves and pneumatic cylinders 3/8".

Nozzle, Gooseneck Tip 1/2" x 1/4"Used with 1/2” nozzle connectors for directional flow on filling machines. Acetal composite material. Industrial Grade nozzle made from virgin FDA approved food grade material.   

Tubing, 3/4" Reinforced Braided PVCFDA approved, food grade #12 flexible tubing used on filling machines. Smooth inner surface ensures minimal pressure drop and friction loss. Temperature range100°F, 40 PSI.

Tubing, 1" Reinforced Braided PVCFDA approved food grade #16 flexible tubing used for filling machines. Smooth inner surface ensures minimal pressure drop and friction loss. Temperature range: 100°F, 40 PSI.

Jack, Manual HeightUsed on non-powered height adjustment of fill head bar. 2000lb. capacity. Jack Assemblys:Tube Framelong handle1012-1566 (1)1016-209 (1)1035-019 (1) long1087-006 (1)1011-325 (1) C-Frameshort handle1012-1566 (1)1016-209 (1)1035-018 (1) short1087-006 (1)

Nozzle, Gooseneck Tip 1/2" x 1/2"Used with 1/2” nozzle connectors for directional flow on filling machines. Acetal composite material. Industrial grade nozzle made from virgin FDA approved food grade materia  

Nozzle, Gooseneck Tip 1/2" x 3/8"Used with 1/2” nozzle connectors for directional flow on filling machines. Acetal composite material. Industrial grade nozzle made from virgin FDA approved food grade material. 

Air Filter RegulatorUsed on E-PAK fillers, bowls, and molten path station. 1/4NPT inlet/outlet with 1/8NPT for gauges and aux. air. Provides enough filtration for most low volume pneumatic applications.

Jack, Power Height ActuatorUsed for electric power height adjustment of fill head bar. 700lb. capacity. 110VAC 1/10HP 1.6AMP

Nozzle, Gooseneck 1/4" ChainUsed with 1/4” nozzle tips for directional flow on filling machines. Acetal composite material. Industrial grade nozzle made form virgin FDA approved food grade material.   

Tubing, Poly White .25" AirStandard tubing for air valves and pneumatic cylinders 1/4"

Tubing, Poly Black .25" AirStandard tubing for air valves and pneumatic cylinders 1/4".

Tubing, Convoluted Teflon 1" IDKink resistant teflon tubing used for acids, corrosives, and molten applications.

Nozzle, Molten Filler No-DripUsed on molten filling machines to eliminate drips.   

Nozzle Assembly, Molten Product NozzleUsed on filling machines to eliminate foam. Nozzle tips to provide surface tension and aid in the elimination of drips. Designed to integrate heater unit option. 1/4” port, 1/2NPT with [...]

Nozzle Assembly, 1/2" De-foamingUsed on filling machines to eliminate foam. Nozzle tips to provide surface tension and aid in the elimination of drips. 5/8” port x 1/2” NPT.   

Nozzle Assembly, 1/2" Chrome De-foaming GooseneckUsed on filling machines to eliminate foam. Nozzle tips to provide surface tension and aid in the elimination of drips. 5/8” port with gray swivel tip assembly.  

Nozzle Assembly, 1/2" Chrome De-foaming Poly GooseneckUsed on filling machines to eliminate foam. Nozzle tips to provide surface tension and aid in the elimination of drips. 5/8” port with Poly swivel tip assembly.  

Nozzle Assembly, 1/2" De-foaming ReversedUsed on filling machines to eliminate foam. Nozzle tips to provide surface tension and aid in the elimination of drips. 1/2” port x 1/2” NPT.   

Fill Head, 5/8" Overflow Style Nozzle Nozzle for use with overflow style filler. Available in various sizes. Contact E-PAK for specific application.   

Fill Head Control AssemblyUsed for product dispensing control for filling machines. Assembly includes: bracket (5051-043), control valve / mechanical ball (1061-008), actuator (1087-001), hose barb fitting 3/4” x 3/4”.   

Nozzle, Diving HeadNozzle for use with diving head style filler. Available in various sizes. Contact E-PAK for specific application.   

O-Ring, Viton 021 Molton NozzleUsed to seal the nozzle at the ball valve.   

O-Ring, Viton 026 Molten NozzleUsed to seal the nozzle between the body and the tip.   

Fitting, Black Straight 3/4NPT x 1" Hose barb used for fill heads and reservoirs and pumps.   

Fitting, Black Reducer Nipple 1/2NPT x 1/4NPT Reducer fitting used on filler nozzles.   

Gripper, Bottle Grabber Finger 1.25Bottle grabber fingers used for bottle neck alignment.1.25"    

Gripper, Bottle Grabber Finger 2"Bottle grabber fingers used for bottle neck alignment.2"  

Valve, Solenoid MAC713, 115VacUsed for control signal to actuating valve on filling machines 80 PSI to 150 PSI operating pressure. Typically used for fill head control.

Valve, Solenoid MAC613, 115VacUsed for control signal to actuating valve on filling machines 40PSI to 80PSI operating pressure. Typically used on drip tray, indexing pin, and bottle orientator controls.

Valve, Solenoid MAC611, 115VacUsed for control signal to actuating valve on filling machines 40PSI to 80PSI operating pressure. (Typically used on float box (B) controls for supply valve).

Valve, Solenoid MAC611, 24VdcUsed for control signal to actuating valve on filling machines 40PSI to 80PSI operating pressure. (Typically used on float box (A) labeling hot ink stamp coder control).

Valve, Pilot, MAC 912Pilot valve used for high C.F.M. air assist.

Valve, Soleniod Parker 110VacUsed for control signal to actuating valve on filling machines 80 PSI to 120 PSI operating pressure. 4-WAY Single SolenoidStackable Din Rail Mountable.

Valve, Soleniod Parker 24VdcUsed for control signal to actuating valve on filling machines 80 PSI to 120 PSI operating pressure. 4-WAY Single SolenoidStackable Din Rail Mountable.

Coil, 115Vac Solenoid, ParkerCoil for a 1123-080 (Valve, Soleniod Parker 110Vac)

Coil, Parker 24Vdc SolenoidCoil for a 1123-097 (Valve, Soleniod Parker 24Vdc)  

Electrical Connector "SUB-25", Parker4-WAY Single Solenoid, Din Rail Mountable. Ues for 1123-080 & 1123-097 valves 

Air Control, Head/Tail Set, Parker(Double Air Supply fitting at 1/4" NPT) (must be used with 1123-080 & 1123-097 Parker Valves)

Cable, Female Connector "D25", Parker5 meters long (Used with Parker 1123-083 SUB25 Connector)

Product Supply Control Valve Assembly - Check ValveUsed for product supply control for E-PAK filling machines. Assembly includes: bracket: 5013-002, control valve / mechanical ball actuator (Z1087-001), hose barb fittings (2)-3/4” x 3/4”

Actuator, Air Operated (Narrow Profile)Used for fill and supply valve actuator on filling machines. Anodized aluminum housing, single cast aluminum piston, 304SS pinion shaft, and Viton o-ring. Max. Temp. 300°F, 110PSI Air 3 Cu. In./cycle. 

Seal Kit, Air Actuator (For 1087-001)Used for repair of the air control valve on fill head assemblies, and product supply control valve assembly.

Nozzle, Poly Gooseneck Tip 1/4" x 1/4"Used for acid filling machines. Polyethylene composite construction. Used with 1/4” nozzle connectors for directional flow.  

Fill Head Assembly, Ball Valve w/Actuator, Acid Resistant 1/2"Used on acid/corrosive resistant filling machines as fill-head assemblies and automatic product supply control valve. Kynar construction with Viton o-rings.

Check Valve Assembly, Ball Valve w/Actuator, Acid Resistant 3/4"Used on acid/corrosive resistant filling machines as fill-head assemblies and automatic product supply control valve. Kynar construction with Viton o-rings.

Seal Kit, Air Actuator (for 1061-010)Used for repairs on acid/corrosive resistant filling machines fill-head assemblies and supply valve control. Viton O-rings.

Seal Kit, Air Actuator (for 1061-015)Used for repairs on acid/corrosive resistant filling machines fill-head assemblies and supply valve control. Viton O-rings.

Seal Kit, Ball Valve (for 1061-010)Used for repairs on acid/corrosive resistant filling machines fill-head assemblies and supply valve control. Viton O-rings.

Seat Kit, Ball Valve (for 1061-008, 018, & 052)Used for repairs on filling machines automatic valves for Fill Heads, product supply valve, and manual throttle flow mechanical control valve.

Valve, Ball 1/2" x 3/4"Used for filling machines automatic fill valve mechanical control. FDA approved food grade components (Teflon seal).

Valve, Manual Ball 3/4" x 3/4"316 stainless steel. Used for manually adjusting, dispensing flow control valve on filling machines. FDA approved food grade components (Teflon seal).

Valve, Ball 3/4" x 3/4"316 stainless steel. Used for filling machines automatic product supply control valve (check valve) mechanical control. FDA approved food grade components (Teflon seal).

Valve, 3/8" Skinner VitonUsed for electrically actuated fillers.

Valve, 1/4" Skinner 115Vac, (Pressure)Used for Pressurizing the Fill Tank with air For Pressure systems.

Actuator, Air Operated (Normal Profile)Used for fill and supply valve actuator on filling machines. Anodized aluminum housing, single cast aluminum piston, 304SS pinion shaft, and Viton o-ring. Max. Temp. 200°F, 110PSI Air 3 Cu. In./cycle. 

Repair Kit, 1/2" Diaphragm Valve, TeflonRepair kit for 1/2” diaphragm valve (Z1061-049).

Valve, Manual Ball 1"316 stainless steel ball valve used for high volume applications.

Repair Kit, Gemini VRK-4Repair kit for Gemini ball valve.

Repair Kit, Gemini VRK-5Repair kit for Gemini ball valve.

Tool, Ball Valve RepairUsed for seal kit repair for ball valve (Z1061-009 & 018).

Float, S.S. 316Used on filling machines for reservoir level control. The dual acting float control provides a back-up safety float to reduce the possibility of over-fill.   

Float, Poly AssemblyUsed on corrosive resistant filling machines for reservoir level control. The dual acting float control provides a back-up safety to reduce the possibility of over-fill.   

Tank Clamp Kit AssemblyUsed on filler reservoirs for clamp connection for tank halves. Kit includes hardware and Buna-NBR O-ring. 

Tank Inner RingThe Ring,inbetween the tank top & bottom, that the O-ring sits around.

Nut, Brass TankReplacement tank band clamp nut.   

Tank O-Ring, Buna-NBRUsed on filler reservoirs for clamp (Z1052-054) seal for tank halves.

Tank O-Ring, Teflon CoatedUsed on filler reservoirs for clamp (Z1052-054) seal for tank halves. Teflon coating provides corrosive resistant properties and extending use of O-ring.

Stator, Buna-NBR 120 (for 1126-010 15GPM Pump)Used for repair of pump on filling machines. Buna-NBR, boot elastomer. Temperature Range: 10°F to 160°F.

Stator, EPDM 320 (for 1126-010 15GPM Pump)Used for repair of pump on filling machines. EPDM, boot elastomer. Temperature range: 10°F to 210°F.

Stator, Viton 520 (for 1126-010 15GPM Pump)Used for repair of pump on filling machines. Viton, boot elastomer. Temperature range: 10°F to 240°F.

Seal, Mechanical-Buna/Ceramic 120 (for 1126-010 15GPM Pump)Used for repair of pump on filling machines. Buna-NBR, cup ring seal and ceramic wear surface for extended use.

Seal, Mechanical-EPDM/Ceramic 320 (for 1126-010 15GPM Pump)Used for repair of pump on filling machines. EPDM, cup ring seal and ceramic wear surface for extended use.

Seal, Mechanical-Viton/Ceramic 520 (for 1126-010 15GPM Pump)Used for repair of pump on filling machines. Viton, cup ring seal and ceramic wear surface for extended use.

Flex-Joint, Buna-NBR (for 1126-010 15GPM Pump) Used for repair of pump on filling machines. Buna-NBR, joint center. Temperature range: 10°F to 160°F.   

Flex-Joint, EPDM (for 1126-010 15GPM Pump) Used for repair of pump on filling machines. EPDM, joint center. Temperature Range: 10°F to 210°F.   

Flex-Joint, Viton (for 1126-010 15GPM Pump) Used for repair of pump on filling machines. Viton, joint center. Temperature Range: 10°F to 240°F.   

Stator, Buna-NBR 120 (for 1126-108 24GPM Pump)Used for repair of pump on filling machines. Buna-NBR, boot elastomer. Temperature range 10°F to 160°F.

Stator, EPDM 320 (for 1126-108 24GPM Pump)Used for repair of pump on filling machines. EPDM, boot elastomer. Temperature range 10°F to 210°F.

Stator, Viton 520 (for 1126-108 24GPM Pump)Used for repair of pump on filling machines. Viton, boot elastomer. Temperature range Temperature range 10°F to 240°F.

Seal, Mechanical-Buna/Ceramic 120 (for 1126-108 24GPM Pump)Used for repair of pump on filling machines. Buna-NBR, cup ring seal and ceramic wear surface for extended use.

Seal, Mechanical-EPDM/Ceramic 320 (for 1126-108 24GPM Pump)Used for repair of pump on filling machines. EPDM, cup ring seal and ceramic wear surface for extended use.

Seal, Mechanical-Viton/Ceramic 520 (for 1126-010 15GPM Pump)Used for repair of pump on filling machines. Viton, cup ring seal and ceramic wear surface for extended use.

Flex-Joint, Buna-NBR (for 1126-108 24GPM Pump) Used for repair of pump on filling machines. Buna-NBR, joint center. Temperature range 10°F to 160°F   

Flex-Joint, EPDM (for 1126-108 24GPM Pump) Used for repair of pump on filling machines. EPDM, joint center. Temperature range 10°F to 210°F.   

Flex-Joint, Viton (for 1126-108 24GPM Pump) Used for repair of pump on filling machines. Viton, joint center. Temperature range 10°F to 240°F.   

Pump, Progressive Cavity 15GPMUsed on filling machines for fill head dispensing and product supply. Dispenses products in excess of 20,000 CP. Operation limit from 100-1750RPM.

Pump, Progressive Cavity 24GPMUsed on filling machines for fill head dispensing and product supply. Dispenses products in excess of 20,000 CP. Operation limit from 100-1750RPM.

Air Cylinder, Drip Tray304 stainless steel body, 303 stainless steel high strength piston rod with low friction Buna-NBR and rod seal. Used for filling machine drip tray. 2” stroke double acting pneumatic cylinder, 250PSI rating.

Air Cylinder, Bottle Grabber304 stainless steel body, 303 stainless steel high strength piston rod with low friction Buna-NBR, and rod seal. Used for bottle grabber orientator. 1” stroke double acting pneumatic cylinder, 250PSI rating.

Air Cylinder, Indexing304 stainless steel body, 303 stainless steel high strength piston rod with low friction Buna-NBR, and rod seal. Used for Indexing. 4” stroke double acting pneumatic cylinder, 250PSI rating.

Air Cylinder, Indexing (Heavy Duty)

Air Cylinder, Starwheel

Weldment, Accessory Rail (Bimba RL)Rail used for mounting Air Cylinders 

Screen, Fine Stainless 5/8" DiameterUsed on filling machines. Inserts for nozzle tips to provide surface tension and aid in the elimination of drips.

Screen, Fine Stainless 3/4" DiameterUsed on filling machines. Inserts for nozzle tips to provide surface tension and aid in the elimination of drips.

Screen, Coarse Stainless 5/8" DiameterUsed on filling machines. Inserts for nozzle tips to provide surface tension and aid in the elimination of drips.

Screen, Coarse Stainless 3/4" DiameterUsed on filling machines. Inserts for nozzle tips to provide surface tension and aid in the elimination of drips.

Screen, Fine Poly 5/8" DiameterUsed on filling machines. Inserts for nozzle tips to provide surface tension and aid in the elimination of drips and foam. Used for acid or corrosive environment filling.

Screen, Fine Poly 3/4" DiameterUsed on filling machines. Inserts for nozzle tips to provide surface tension and aid in the elimination of drips and foam. Used for acid or corrosive environment filling.

Screen, Coarse Poly 5/8" DiameterUsed on filling machines. Inserts for nozzle tips to provide surface tension and aid in the elimination of drips and foam. Used for acid or corrosive environment filling.

Screen, Coarse Poly 3/4" DiameterUsed on filling machines. Inserts for nozzle tips to provide surface tension and aid in the elimination of drips and foam. Used for acid or corrosive environment filling.

DCS Controller, Keypad Operator InterfaceUsed on filling machines for operator adjusted set points. Designed to easily accommodate adjustments to fill time, indexing time, conveyor, cycle-time, and many others.   

DCS Controller, Keypad Operator Interface, (Re-conditioned)Used on filling machines for operator adjusted set points. Designed to easily accommodate adjustments to fill time, indexing time, conveyor, cycle-time, and many others. We rarely have them in stock. [...]

DCS Controller, Re-conditioning YOUR ControllerYou send your DCS Controller in and we have it re-conditioned. The Hardware and software is brought up to date with todays DCS. It comes with a one [...]

DCS Controller, 1AMP Output ModuleModule for the DCS. Each output needs one for the output to operate. 

DCS Controller, Keypad 

DCS Controller, Dolphin Bezel (FRAME)The Frame around the DCS controller. 

Bracket, Fiber Optic AssemblyUsed for Fiber Cables

Bracket, Photo EyeUsedfor Omron and Seeka Eyes

Bracket, Reflector

Spring, 304SS 1" HoseUsed for 1" Tubing support

Spring, 304SS 3/4" HoseUsed for 3/4" Tubing support  

Bracket, Fill Head MountingFill Bar Bracket used to mount the fill head assy.

Valve, Diving Head Quick Dump 1/4"Used on diving head cylinders

Valve, PVC Manual (Check Valve)

Needle Valve, Flow ControlUsed for air flow control on cylinders

Needle Valve, Flow Control (1/8NPT x 5/32AIR)Used for air flow control on cylinders

Valve, Brass 1/8" NPT Mini Ball ValveUsed to bypass the pumps on a Pump Filler

Gauge, Back Mount 1/8NPT 0-160PSIPressure gauge used on multiple machines.  

Knob, Black (5/16-18)Used on standard stainless steel “L” bracket (Z1000-453).

Bracket, 11GA. "L" Slot304 stainless steel, heavy duty bracket for conveyor railing and turntables.  

Bracket, 304SS Small Bimba "L" 304 stainless steel, heavy duty bracket for indexing gates and mounting eyes.   

Bracket, 12GA. Std. "L"304 stainless steel, standard bracket for conveyor railing and turntables.

Bracket, Filler, Fill Head (New)Fill head mounting bracket for narrow profile fill head (Z1087-001).  

Bracket, 3/4 Ball Valve Mounting ShoeFill head mounting bracket for narrow profile fill head (Z1087-001).  

Tank, Stainless Steel, Pressure/Gravity This tank is custom to the Filler. Please call for a Quote. 

Nozzle, Gooseneck 1/2" Chain, PolyUsed for acid filling machines. Polyethylene composite construction. Used with 1/2” nozzle connectors for directional flow. 

Motor, 3/4 HP 220/480V 3PH 60HZUsed on Pump Fillers, to drive the fill head pumps

HOSE CLAMP, 304SS #16 For 1" Tubing  

HOSE CLAMP, 304SS #12 For 3/4" Tubing  

HOSE CLAMP, 304SS, #28 For 1 1/2" Tubing