Jack, Power Height ActuatorUsed for electric power height adjustment of fill head bar. 700lb. capacity. 110VAC 1/10HP 1.6AMP

Motor, Wrap Belt A Right to LeftUsed on labelers as a part of after application wipe-down wrap belt unit.

Motor, Wrap Belt A Left to RightUsed on labelers as a part of after application wipe-down wrap belt unit.

MOTOR, 1/2 HP 90RPMUsed on 4 Station Cappers (Gripper Belts)

Motor, Wrap Belt B Used on labelers as a part of after application wipe-down wrap belt unit, and belt transfer assemblies.

Motor, 50RPM 90VDC, 1/30HPUsed on labelers as a part of after application wipe-down foam rollers, and belt transfer assemblies.

Motor, 102RPM 90VDC, 1/30HPUsed on labelers as a part of after application wipe-down foam rollers, and belt transfer assemblies (high speed).

Float, S.S. 316Used on filling machines for reservoir level control. The dual acting float control provides a back-up safety float to reduce the possibility of over-fill.   

Float, Poly AssemblyUsed on corrosive resistant filling machines for reservoir level control. The dual acting float control provides a back-up safety to reduce the possibility of over-fill.   

DCS Controller, Keypad Operator InterfaceUsed on filling machines for operator adjusted set points. Designed to easily accommodate adjustments to fill time, indexing time, conveyor, cycle-time, and many others.   

DCS Controller, Keypad Operator Interface, (Re-conditioned)Used on filling machines for operator adjusted set points. Designed to easily accommodate adjustments to fill time, indexing time, conveyor, cycle-time, and many others. We rarely have them in stock. [...]

DCS Controller, Re-conditioning YOUR ControllerYou send your DCS Controller in and we have it re-conditioned. The Hardware and software is brought up to date with todays DCS. It comes with a one [...]

DCS Controller, 1AMP Output ModuleModule for the DCS. Each output needs one for the output to operate. 

DCS Controller, Keypad 

DCS Controller, Dolphin Bezel (FRAME)The Frame around the DCS controller. 

Bracket, Fiber Optic AssemblyUsed for Fiber Cables

Bracket, Photo EyeUsedfor Omron and Seeka Eyes

Bracket, Reflector

Hole PlugUsed for plugging electrical enclosure holes for 22.5mm switchesGray

Motor, 1/2HP, 40RPM, 90VDCMotor used on the 3 Station Cappers (Gripper Belt Drive)

MOTOR, 1/2 HP 90V 850RPMUsed for a 3 Station Capper (Spindle Drive) 

Motor, Leeson 90 VDC, 1/4 HPUsed on Turntables, Elevators, & Pocket Sorters

Controller, Vibitory CubeUsed on Vibratorysorting equipment for adjustment of vibration by limiting power to coil (1119-001) 

Controller, Vibitory CubeUsed on Vibratorysorting equipment for adjustment of vibration by limiting power to coil (1119-001). Come with a Fiber Optic Amplifie,for pausing the bowl when the chute is full.Fiber Not Included 

Motor, 1/2HP, 1750RPM, 90VDCMotor drive for conveyors and 4 Station Capper, (sometime the 3 Staion Capper) (Spindle Drive).

Sensor, Photoelectric SwitchUsed for hazardous location and chute bowl Full Chute Pause.

Fiber Cable, FU-6FFiber optic sensor used with filling, capping, labeling, and many other packaging components  

Fiber Cable, FU-7FFiber optic sensor used with filling, capping, labeling, and many other packaging components

Sensor, Photo Optic SeekaUsed on filling machines for product detect/count/bottle-in-place, and product detect jam.

Sensor, Retro-ReflectiveOmron photoelectric switch. Sensing distance 600cm.This sensor uses a reflector.

Sensor, VisoluxUsed on clutch/brake labelers for label positioning. This sensor will not work with mylar labels.

Sensor, OmronPhotoelectric switch, sensing distance 10cm. Used on clutch/brake labelers for sensing the bottles

Relay, G2R, 115VACUsed for float box controls and conveyor inhibit relay. 

Relay, G2R, 24VDCUsed for float box controls and conveyor inhibit relay.

Relay, LY2, 115VAC

Relay, LY2, 24VDC

Relay, LY4, 24VDC

Relay, LY4, 115VAC

Relay, G7L (G5D)Single pole relay primarily used for switching of AC conveyors by the DCS control unit and filler control box.

Socket, Relay G2RFor single pole G2R relays

Socket, Relay LY2For Double Pole LY2 Relays

Socket, Relay LY4For 4 Pole LY4 Relays

Switch, Pressure RegulatorUsed for filling machines to maintain proper tank pressure. The pressure regulating gauge signals an air valve when additional pressure is needed.

Controller, Omron SP10-DR-AProgrammable logic controller used for control of various systems primarily on clutch/brake labelers.  

Timer, 1/10th SecondUsed on filling machined with independent adjustable digital timers.

Switch, E-Stop PushbuttonEmergency stop button for various machines

Speed Pot Control (30mm)5k rotary speed pot, 3/4 turn

Speed Pot Control (22mm)5k rotary speed pot, 3/4 turn.

Speed Pot Digital Display5k analog, speed adjustment pot used on capping machines and other E-PAK equipment.

ISR - Intrinsically Safe RelayIntrinsically safe switch used for float control system.

Clutch/Brake Drive BoardUsed on clutch/brake labeler. Power unit supplied control power alternating from brake to clutch. Warner 

DC Motor Control BoardFor DC motor control on cappers, conveyors, and similar machines. Board controls min/max and acceleration of motor speed range. Plug in resistors from 1/100 to 1 HP (see chart below).

DC Motor Control Board For DC motor control on cappers, conveyors, and similar machines. Board controls min/max and acceleration of motor speed range. Plug in resistors from 1/100 to 1 HP (see chart [...]

DC Motor Control Board Resistor1211-003 1 HP Resistor1211-004 3/4 HP Resistor1211-005 1/2 HP Resistor1211-006 1/3 HP Resistor1211-007 1/4 HP Resistor1211-008 1/8 HP Resistor1211-009 1/12 HP Resistor1211-0010 1/20 [...]

DC Motor Terminal and Signal BoardKBIC: Barrier Terminal, and Analog Board Combo: Can be used on all standard KBIC Boards, to control Speed for 0 to 10Vdc Signal for Nematorn Fillers...   

Motor, 3/4 HP 220/480V 3PH 60HZUsed on Pump Fillers, to drive the fill head pumps