Air Filter RegulatorUsed on E-PAK fillers, bowls, and molten path station. 1/4NPT inlet/outlet with 1/8NPT for gauges and aux. air. Provides enough filtration for most low volume pneumatic applications.

Jack, Power Height ActuatorUsed for electric power height adjustment of fill head bar. 700lb. capacity. 110VAC 1/10HP 1.6AMP

MOTOR, 1/2 HP 90RPMUsed on 4 Station Cappers (Gripper Belts)

Chain, #25 Nickel Plated Low noise chain used on clutch/brake labelers.  

Chain #25 Master Link Nickel PlatedMaster link for low noise labeler chain.  

Pulley, Side Belt Idler 2 StationUsed on labelers as part of the belt separator sprocket wheel for gripping belts (Z1099-091 & 092).Also used on 2 Station Cappers for a gripper belt pulley

Pulley, Side Belt Drive 2 StationUsed on labelers as part of the belt separator sprocket wheel for gripping belts (Z1099-091 & 092).Also used on 2 Station Cappers for a gripper belt pulley

Belt, Gripper (L-Series) 3/4” x 3/8” x 450”Used on bottle separator for gripping of bottle while separating. Compound material designed for reduced marking of bottle.also used on 2 Station Cappers for gripper belts

Belt, Gripper (L-Series) 3/4” x 1/4” x 450”Used on bottle separator for gripping of bottle while separating. Compound material designed for reduced marking of bottle.Also used on 2 Station Cappers for gripper belts

Bearing Block Assembly Used on capping machines for idle pulley mounting and belt tension adjustment.(For the Gripper Belt Assembly) 

Pillow Block, 5/8” 2 Bolt FlangeFlange bearing used on cappers and conveyors.  

Pillow Block, 3/4” 2 Bolt FlangeFlange bearing used on cappers and conveyors.  

Belt, White Snap Capper, CompleteUsed on snap capping machines for the application of snap caps. Material designed for reduced markings of bottle.    

Belt, White Snap CapperUsed on snap capping machines for the application of snap caps. Material designed for reduced markings of bottle.  

Belt, Gripper: L-Series 3/4” x 1/4” x 600” NeopreneUsed on capping machines for bottle gripping while capping. Material designed for reduced markings of bottle, and high resistance to oil products.

Belt, Gripper: L-Series 1-1/2” x 3/8” x 600”Used on capping machines for bottle gripping while capping. Compound material designed for reduced markings of bottle.

Belt, Gripper: L-Series 1-1/2” x 1/4” x 600”Used on capping machines for bottle gripping while capping. Compound material designed for reduced markings of bottle.

Belt, Gripper: L-Series 3/4” x 1/4” x 600”Used on capping machines for bottle gripping while capping. Compound material designed for reduced markings of bottle.

Pulley, Drive: L-Series 3/4” Wide x 3/4” BoreUsed on capping machines for gripper belt sprocket wheel with 3/4” gripper belts (Z1099-089 & 090).

Pulley, Idle: L-Series 3/4” Wide x 5/8” BoreUsed on capping machines for gripper belt sprocket wheel with 3/4” gripper belts (Z1099-089 & 090).

Pulley, Idle: L-Series 1-1/2” Wide x 5/8” BoreUsed on capping machines for gripper belt sprocket wheel with 1-1/2” gripper belts (1099-096 & 097).

Pulley, Drive: L-Series 1-1/2” Wide x 3/4” BoreUsed on capping machines for gripper belt sprocket wheel with 1-1/2” gripper belts (1099-096 & 097).

Pulley, Drive: L Series 3/4” Wide x 3/4” Bore PlasticUsed on capping machines for gripper belt sprocket wheel with 3/4” gripper belts (1099-089 & 090). 

Pulley, Idle: L Series 3/4” Wide x 5/8” Bore PlasticUsed on capping machines for gripper belt sprocket wheel with 3/4” gripper belts (1099-089 & 090).

Gearbox, Small Left TolomaticRight angle gearbox that drives the spindles on the capper.  

Chuck, Stem Assembly #60Used on handheld chuck capping machines with insert wear material.(Cap Sizes: 40mm-80mm)  

Chuck, Stem Assembly #50Used on handheld chuck capping machines with insert wear material.(Cap Sizes: 30mm-50mm)  

Chuck, Stem Assembly #40 Used on handheld chuck capping machines with insert wear material.(Cap Sizes: 25mm-40mm)  

Chuck, Stem Assembly #30 Used on handheld chuck capping machines with insert wear material. (Cap Sizes: 25mm-35mm)  

Chuck, Stem Assembly #25 Used on handheld chuck capping machines with insert wear material.(Cap Sizes: 15mm-30mm)  

Clutch, Horton AirThis Clutch is used on the older 3 Station Capper, to control the third setof spindles.

Insert, Chuck #60Used on handheld chuck capping machines. Compound material designed for reduced markings of cap. (Cap Sizes: 40mm-60mm)  

Insert, Chuck #50Used on handheld chuck capping machines. Compound material designed for reduced markings of cap. (Cap Sizes: 30mm-50mm)  

Insert, Chuck #40Used on handheld chuck capping machines. Compound material designed for reduced markings of cap. (Cap Sizes: 25mm-40mm)  

Insert, Chuck #30Used on handheld chuck capping machines. Compound material designed for reduced markings of cap. (Cap Sizes: 25mm-35mm)  

Insert, Chuck #25Used on handheld chuck capping machines. Compound material designed for reduced markings of cap. (Cap Sizes: 15mm-30mm)  

Gripper Disc, YellowStandard gripper, also supplied with OEM capper. Used on capping machines for the spindle disk wear material. Compound material designed for reduced markings of cap. 55 durometer, medium.  

 Gripper Disc, TanUsed on capping machines for the spindle disk wear material. Compound material designed for reduced markings of cap. 70 durometer, hard.  

Gripper Disc, RedUsed on capping machines for the spindle disk wear material. Compound material designed for reduced markings of cap.50 durometer, medium.    

Gripper Disc, BlueUsed on capping machines for the spindle disk wear material. Compound material designed for reduced markings of cap. 60 durometer, medium.  

Gripper Disc, Clear (Hard)Used on capping machines for the spindle disk wear material. Compound material designed for reduced markings of cap. 60 durometer, medium.  

Gripper Disc, Clear (Soft)Used on capping machines for the spindle disk wear material. Compound material designed for reduced markings of cap. 20 durometer, soft.  

Gripper Disc, GreyUsed on capping machines for the spindle disk wear material. Compound material designed for reduced markings of cap.70 durometer, hard.  

Gripper Disc, WhiteUsed on capping machines for the spindle disk wear material. Compound material designed for reduced markings of cap.72 durometer, hard.  

Air Cylinder, F-StyleThe tip of the Piston Rod needs to be cut off.

Air Fitting, Brass 10/32NPT x 1/4 AirUsed with the F-Style Cylinder (1113-007) 

Capper, Spindle Wheel Retrofit Kit6 spindle assemblies that mount to existing capper spindle shafts, significantly reducing changeover times.   

Capper, Spindle Wheel Upgrade1 spindle assemblies that mount to existing capper spindle shafts.   

Tensioner, Reel (HH)Used for handheld chuck capper for ease of recoil.

Clutch, Poly Pneumatic Capper SpindlesUsed on New 3 Station & 4 Station Capper.  They are used on all but the first set of spindle assenblies.

Gearbox, Small Right TolomaticRight angle gearbox that drives the spindles on the capper.  

Gearbox, Large Right TolomaticRight angle gearbox that drives the Gripper Belts on the capper.  

Gearbox, Large Left TolomaticRight angle gearbox that drives the Gripper Belts on the capper.  

Belt, Gripper: L-Series 3/4” x 3/8” x 600”Used on capping machines for bottle gripping while capping. Compound material designed for reduced markings of bottle.

Pulley, Drive: L-Series 1 1/2” WideUsed on 4 Station Cappers

Motor, 1/2HP, 40RPM, 90VDCMotor used on the 3 Station Cappers (Gripper Belt Drive)

MOTOR, 1/2 HP 90V 850RPMUsed for a 3 Station Capper (Spindle Drive) 

Plunger, Vlier Spring, POSI-HEX 10-32Spring loaded plunger for the chute 

Plunger, Vlier Spring, POSI-HEX 6-32Spring loaded plunger for the chute  

Air Fitting, Brass 1/8NPT x 1/8 Air (Grease Fitting)Used on Capper Grease Lines 

Fitting, 304SS 1/8" Grease Zert Uedfor capper grease lines 

Tubing, Nylaflow 1/8" High PressureUsed on Cappers for grease line

Keystock, LG Tol-O-Matic KeyKey for the Large Tol-O-Matic 

Keystock, SM Tol-O-Matic KeyKey used for the Small Tol-O-Matic  

Motor, 1/2HP, 1750RPM, 90VDCMotor drive for conveyors and 4 Station Capper, (sometime the 3 Staion Capper) (Spindle Drive).

Gauge, Back Mount 1/8NPT 0-160PSIPressure gauge used on multiple machines.  

Gripper Disc, Duo-durometerDuo – 25 durometer outside, 70 durometer inside.   

Belt, Gripper, 3/4" x 1/4", Used on 4 Station Cappers 

Belt, Gripper, 1 1/2" x 1/4",Used on 4 Station Cappers

Belt, Gripper, 1/4" x 1/4",Used on 4 Station Cappers